Showing posts with label Sending Smiles. Show all posts
Showing posts with label Sending Smiles. Show all posts

Sunday, 11 September 2022

Share it on a Sunday - Anything Goes - Double Vertical Stepper Card

 Hi Everyone,



Today we have an 'Anything Goes' theme so I've made a fun fold card inspired by the lovely Sam Calcott on Mixed Up Crafts, she called it a Double Vertical Stepper Card. I've used the gorgeous In Colour paper stack, the Pretty Flowers Embossing Folder and the Sending Smiles Bundle. This card folds flat and is 6" square.

Materials

2 pieces of 6" x 12" Tahitian Tide card stock, 1 piece 5 1/2" x 4"scrap for the die cut
1 piece of basic white 3 7/8" square, 1 piece 5 1/2" square scraps for die cuts and stamping
1 piece of dsp 6" square, 2 pieces 1 3/4" x 6", 2 pieces 7/8" x 6"
Tahitian Tide ink
Parakeet Party ink
Daffodil Delight ink
Sending Smiles Bundle
Stampin' Cut & Emboss Machine
Basic Rhinestones
Pretty Flowers Embossing Folder
Trimmer
Simply Scored
Bone Folder
Multipurpose Adhesive
Dimensionals

Instructions

On the long side, score both pieces of Tahitian Tide card at 6", 8", 10" and 11" and fold and burnish to make the card base. Sit one inside the other and adhere the two large square pieces together, one on top of the other, it doesn't matter which way (see picture).

Adhere the dsp to the large square and the two largest steps but NOT the narrow one at the front.

Score the smaller piece of Tahitian Tide on the long side at 3/4" and 4 3/4" and fold and burnish.  This piece sits on top of the front strips and is then covered by the dsp strips. Decide where you want the piece across the centre to go and adhere in place, then adhere the strips of dsp over the top to hide the join. You need to fold the card flat the adhere this piece in place.


Run the basic white piece through the machine in the embossing folder and adhere that to the centre bridge section.


Stamp some flowers and leaves and die cut them as well as the word 'Sending' and a label for the sentiment that you have chosen. Stamp the sentiment on the label you have cut.  Arrange the die cuts and sentiments on the embossed layer and fix in place using dimensionals.

Add some rhinestones (I always lose the 'dot' from the 'i' so replace it with a rhinestone).

Stamp a sentiment and some flowers on the remaining piece of basic white and add to the back of the card to write your message.


I hope that you like my card, don't forget to pop over and see what Donna and Victoria have made this week too.


Donna Lester

Victoria Littlewood

My latest Class in the Mail is now available to order - click on the link in the side bar for more information.




If you would like to see more of my Blog Posts, follow me on Facebook or sign up for a copy of my Weekly Newsletter (emailed out every Monday morning and link copied to my Facebook Pages).

If you would like to join my Team or become one of my Discount Shoppers, you can message me on my Facebook Page at www.facebook.com/craftykarendesigns or via the Contact Me box below this Blog.

f you are interested in taking part in some challenges and having crafty chats with like minded people and a bit of a laugh, pop over to Crafty and Banter on Facebook (link in the side bar). This is a new group that some crafty friends and I are trying to get up and running and we would love your company.

Happy Crafting,

Karen XXX

Product List

Friday, 8 July 2022

Awash in Beauty Double Side Shutter Fold Card

 Hi Everyone,



This card is another one I made during my crafty day with Donna from Taffy Crafting. It's a Double Side Shutter Fold and I have used the gorgeous Subtles dsp stack in Balmy Blue and the Awash In Beauty dsp with a sentiment from Sending Smiles. Let me show you how I made it.

Materials

1 piece of balmy blue card stock 5 7/8" x 8 1/4"
2 pieces dsp 7/8" x 5 3/4", 1 piece 7/8" x 4 1/8", 1 piece 1 3/8" x 4 1/8", 1 piece 1 1/4" x 4 1/8"
1 piece of Awash in Beauty dsp 3 1/4" x 4 1/2"
1 piece of basic white 2" x 5 5/8" and a scrap for the sentiment
Sending Smiles stamp set
Sending Dies
Stampin' Cut & Emboss Machine
Scalloped Contour dies
Multipurpose adhesive
Dimensionals
Trimmer
Simply Scored
Bone Folder
Night of Navy ink
Adhesive Backed Sequins & Gems
Take Your Pick Tool

Instructions

On the long side score the balmy blue card at 1", 2", 3" and then repeat from the other side.

On the trimmer, turn the card to the short side and line up at the 1" mark and cut between the 1st and 3rd score line from the top and repeat at the bottom along the same 1" line.

Move the card to the 2" mark and repeat the cuts you just made.

Move along to the 3 1/2" mark and repeat the cuts and then again along the 4 1/2" line.

Carefully push the pieces between the cuts back and bring the ones at the side of them forwards and then burnish the folds. You should end up with top, middle and bottom sections forward and the 2nd and 4th back (see finished card).


Add the dsp layers to the panels across the card and down the two side panels as shown in the picture.

Die cut a piece of the Awash in Beauty dsp with the 2nd largest Scalloped Contour die, I carefully chose a bouquet from one of the pieces that I wanted to show off. Add dimensionals to the back and adhere to the front of the card as shown.


Stamp a sentiment on a scrap of white and then die cut with one of the label dies from  the Sending dies, add to the card front using dimensionals.

Adhere the remaining piece of white card to the back of the card to write your message.

Sprinkle some sequins around the flowers and the card is complete.

Pop over and see what Victoria has made this week:

Victoria Littlewood

If you would like to see more of my Blog Posts, sign up to my Weekly Newsletter.

New Class in the Mail


Click on the link in the side bar for more details.

If you would like to join my Team or become one of my Discount Shoppers, you can message me on my Facebook Page at www.facebook.com/craftykarendesigns or via the Contact Me box below this Blog.

If you are interested in taking part in some challenges and having crafty chats with like minded people and a bit of a laugh, pop over to Craft and Banter on Facebook (link in the side bar). This group is a collaboration with Taffy Crafting (Donna Lester) and Vickieloudesigns (Victoria Littlewood) and we would love you to join us.

Happy Crafting,


Karen X


Product List

Friday, 1 July 2022

Sending Smiles In Colours - Bookbinder Fun Fold Card - Stamp Around UK Video Hop

 Hi Everyone,



This month we are showcasing the 2022-2024 In Colours which are a lovely, bright set of colours and I love them all.

I've used the In Colour Designer Series Paper too and teamed it with the Sending Smiles stamp set and dies for a lovely, bright, cheerful card Bookbinder Fun Fold card. Let me show you how I made it, there is also a Video Tutorial over on my YouTube Channel, link below.


Video Tutorial

Materials

1 piece of starry sky card stock 4 1/8" x 11 1/2"
1 piece of dsp 4 1/2" x 3 7/8", 1 piece 4" x 3 3/8", 1 piece 3 7/8" x 3/4"
1 piece of basic white 4 1/2" x 3 7/8"
Scraps of white for stamping and die cutting
Stampin Cut & Emboss Machine
Sending Smiles stamp set
Sending dies
Tahitian Tide Glitter ribbon
Sweet Sorbet ink
Parakeet Party ink
Tahitian Tide ink
Multipurpose adhesive
Dimensionals
Mini Glue Dots
Trimmer
Simply Scored
Bone Folder
Take Your Pick Tool
Paper Snips

Instructions

On the long side score the card stock at 4 3/4" and 5 3/4" and fold and burnish. The 5 3/4" score is the half way fold line and the 4 3/4" piece is the book opening.

Adhere the strip of dsp to the 1" strip which forms the binding. Wrap the ribbon around this section and tie in a bow on the front, then adhere this 1" strip on the inside, this forms the spine (bind) of the book fold.


Adhere the two dsp layers to the card front.

Stamp the flower and smaller sentiment on the scrap card and then die cut. Die cut the word 'Sending' and it's shadow piece. Adhere these pieces to the card front on dimensionals.

Stamp a sentiment and another flower on the remaining piece of white for the inside of the card and adhere it in place.


I do hope that you like my card, click on the link above to watch the tutorial.

If you would like to see more of my Blog Posts, sign up to my Weekly Newsletter.

If you would like to join my Team or become one of my Discount Shoppers, you can message me on my Facebook Page at www.facebook.com/craftykarendesigns or via the Contact Me box below this Blog.

If you are interested in taking part in some challenges and having crafty chats with like minded people and a bit of a laugh, pop over to Craft and Banter on Facebook (link in the side bar). This group is a collaboration with Taffy Crafting (Donna Lester) and Vickieloudesigns (Victoria Littlewood) and we would love you to join us.

Happy Crafting,


Karen X


Product List