Monday, 17 December 2018

Butterfly Sampler

Hi There,

I'm really pleased with the finished result of this project and I hope that you will give it a try.  The Gingham Gala designer series paper is lovely and the Butterfly Gala stamp set is beautiful.  Here's how I made it:


1 x Shadow Box Frame with internal measurements of 6" x 6" (This one is from Hobbycraft)
1 x piece of 6" x 6" whisper white card for the base
4 x pieces of 1 3/4" x 1 3/4" whisper white card
4 x pieces of 2 3/4" x 2 3/4" gingham gala dsp (I used daffodil delight, lemon lime twist, highland heather and grapefruit grove)
Ink pads in colours to match the gingham paper
Butterfly Gala stamp set
Butterfly Gala punch
Pretty Label punch
Scraps of whisper white card for the butterflies and the sentiment
Glue, glue dots


Cut out all the pieces of whisper white and the gingham gala dsp in your chosen colours.

Arrange the pieces of gingham gala paper on the 6 x 6 whisper white leaving a border around the edge and in between them.

Now arrange the smaller pieces of whisper white in the centre of each of the gingham squares.

Using scraps of whisper white, stamp out 4 sets of butterflies in the colours of your choice and the sentiment in a contrasting colour. Balmy Blue was the only colour gingham paper that I didn't use so I chose that for my sentiment, Hello Beautiful.

Stamp out the butterflies with the butterfly punch and for the sentiment, I used the pretty label punch but you can use whatever you like.

Then arrange your butterflies on the pieces of white card and stick them down with glue dots, dimensionals or glue and bend the wings upwards. Place your sentiment in the centre of the picture and adhere with dimensionals.

Place the finished sampler inside your frame and hang on the wall. Beautiful!!

This is a quick and easy project to make and I hope you agree, it looks lovely, I hope that you will give it a try.

If you would like to purchase any of the items shown please check out my online shop

Karen xx

Product List

Sunday, 16 December 2018

Floating pop up box card

Hi there,

Today I'm bringing you a pop up card with a difference. This card uses the beautiful new Gingham Gala DSP from Stampin Up and the new stamp sets Incredible Like You and Well Said as well as some beautiful silver foiled card from my stash. I hope you like it, here's how I made it:


1 x piece whisper white card measuring 12" x 5 3/4"
1 piece of whisper white card measuring 2 5/8" x 5 1/4"
1 x piece of balmy blue card measuring 5 1/2" x 5 1/2"
3 x pieces of balmy blue card measuring 2 5/8" x 5 1/2"
1 piece of balmy blue gingham gala dsp measuring 5 1/4" x 5 1/4"
2 pieces of balmy blue gingham gala dsp measuring 2 3/8" x 5 1/4"

scraps of silver foil for the stars
scrap of balmy blue card for the sentiment
small piece of crochet cotton or similar to hang the star
red line tape or other similar very strong double sided tape

Incredible Like You stamp set
Well Said stamp set
Big Shot die cutting machine

2 x star shaped dies to cut out the shapes, I used the 2nd and 3rd largest ones (these are from my stash but you could easily change the shape and use the Stitched Shape Circles, Squares or Ovals from Stampin Up, the process is the same whichever shape that you use.


Take the large piece of whisper white card and score on the long side at 2 7/8", 5 3/4", 8 5/8" and 11 1/2" but do not fold and burnish these lines yet. You will have 4 sections that are the same width and 1 which is a skinny one which will form the tab.

Using the 2 sections furthest from the tab, place your balmy blue card centrally over the score line which separates these two sections. If you don't have a magnetic plate on your Big Shot machine, you may want to tack these two pieces together with a tiny piece of low tack tape or washi tape between the two layers.

First place your larger die centrally on the gingham dsp and run through the Big Shot and then position it centrally on the card so that you can judge where the smaller die will go.

Then place the smaller of the two shaped dies centrally within the shape already cut from your dsp. Run the card through the Big Shot, it will cut both layers quite easily, this will ensure that your contrasting card and your base card line up.

Cut out two smaller star shapes and glue together using a piece of the crochet cotton between the layers which is long enough to reach top and bottom of the opening on the blue card. Then using red line tape adhere the ends of the cotton in place on the wrong side of the blue card to keep in place. Stick the blue card to the whisper white base and then adhere the dsp to the top.

Fold and burnish the card down the centre and the two rear panels as well as the tab. Bend the centre, front line carefully between your fingers. This will give your card the required shape to the front when it is displayed.

Adhere the strips of dsp to 2 of the remaining mats and then glue them to the inside back panels so that they can be seen through the aperture in the card. Using red line tape (or similar) stick the tab to the back side of the front square to form a box.

Cut 4 smaller stars from the silver foil and adhere to the front of the card.

Stamp the sentiment on a scrap of balmy blue and cut out either with a die or scissors and stick to the front underneath the aperture with some dimensionals.

Adhere the final piece of whisper white to the last mat of balmy blue and stamp the other image in balmy blue ink into the centre, then stick that to the left hand section of the back of the card.

I hope you agree, its a pretty stunning card.  There are lots of steps but if you follow them carefully, you too can produce a card like this. Give it a try, I'd love to see your version.

The original idea was taken from a card designed by the lovely Sam from Mixed Up Crafts but this version is completely my design, I hope that you like it.

Bye for now

Karen xx

Product List

Wednesday, 15 August 2018

Delightfully Detailed Birthday Card

15th August 2018

Hi everyone,

Karen here again with another card. Today it's a birthday card using the delightfully detailed lace paper, which is beautiful and doesn't need much else to make a card look pretty. It's really simple to make and it looks great.

This is a great card for a beginner, it's a very simple technique but looks really effective.

Here's what you need to make it:


Whisper white card to make a card blank measuring 6" x 4" (I have used a ready made card base in the example)
A piece of  coloured cardstock or designer series paper, 5 1/2" x 3 7/8" (this is from the Tranquil Textures Suite)
A panel of the delightfully detailed lace paper to fit the dsp/cardstock
A piece of scrap card for the sentiment in a colour to match (I've used Balmy Blue)
Stampin Up Ink Pad (Blueberry Bushel)
Detailed With Love Stamp Set (mine are wood mounted so no clear block required)
Stampin Dimensionals
Pretty Label Punch
Sponge (to apply the glue)


1. Make a card base using a piece of Whisper White cardstock (I have used a ready made card base in this example).

2. Cut a piece of either cardstock or DSP to mat on top of the card base (5 1/2" x 3 7/8"), I have used a piece of the Tranquil Textures Suite in a lovely shade of blue.

3. Carefully trim a panel from a sheet of the delightfully detailed lace paper to fit, this paper is whisper white on one side and very vanilla on the other, so will match any colour.

4. The simplest way to adhere this lace paper to your card is to put a blob of glue on a piece of scrap card, or a silicone mat if you have one, then carefully apply the glue, using a sponge to the back of the lace panel, taking care not to tear it.

5. Adhere the panel to the cardstock or DSP and then mount that on to the card base.

6. Stamp your sentiment on a piece of scrap cardstock and punch out with the pretty label punch, add dimensionals to the back and position on your card.

The finished result is a very simple but pretty card that I am sure anyone would appreciate. 

Hope you like my card, happy crafting

Karen xx

(All stamped images are © Stampin' Up!)

!-------- TAMS Start ----------> Product List